Specifications
| INPUT IMPEDANCE: | High input impedance >1G Ohm (protected inputs are available). |
| COMMON MODE REJECTION: | High common mode rejection! Typical CMRR @ 50/60 Hz is ~112 dB; this reduces the requirement for special "screen rooms" and other low EMI/RFI environments and signal damaging 50/60 Hz notch filters. |
| NOISE: | Low noise, the typical base noise levels are ~0.6 uVpp @ 100 Hz BW and ~4.5 uVpp @ 10k Hz BW, measured 10 - 10 M Hz averaged. |
| ISOLATION: | Full isolation with a 3500Vpk optical & magnetic isolation barriers using state-of-the-art 1990's technologies. |
| CROSSTALK: | Negligible crosstalk between channels; > 10000:1 (>80db), worst case at full output. (An important spec rarely specified) |
| BANDWIDTH: | Bandwidth selected at the time of order from 0.01 Hz - 10k Hz |
| GAIN: | Gain selected at the time of order from 100-200,000. A quad gain option is available. |
| HIGH PASS FILTER: | Quad-frequency HPF option available. |
| LOW PASS FILTER: | Quad-frequency LPF option available. Butterworth 2-pole filter response is standard; other types and 4-poles optional. |
| OUTPUT LEVEL: | 4.0 Vpp (+/- 2.0V) |
Created by SAI
Copyright © SA Instrumentation. All rights reserved.
Revised: June 1, 2010.